The protocols used for Authentication are MD5 and SHA. authNoPriv - Communication with authentication and without privacy.Protocols used are MD5 and SHA for authentication and AES ( AES-128) for privacy. authPriv - Communication with authentication and privacy.Security level – security levels supported by SNMP agent.Security name – username used for authentication.Location – Optional, description of NETIO device physical location.3 – SNMP v3 uses authorization and encryption, allows monitoring and control.Enable SNMP – Enable/disable M2M API protocol.In the device web administration go to M2M API Protocols section, enable SNMP, select SNMP v3 version and set the following:

Note: Metered values are available only for device with metering support. *: The start time that Energy (cumulated consumption) is counted from.

These utilities don’t work with MIBs, only with OIDs. The utilities are free-of-charge for non-commercial use. In Windows, utilities such as SnmpWalk, SnmpGet or SnmpSet by the EZ Systems ( ) can be used for SNMP communication. For a brief installation manual, see the “ Installing the Net-SNMP utility in Linux” section at the end of this document. In Linux, utilities such as snmpwalk, snmpget or snmpset from the snmp package ( ) can be used for SNMP communication. NETIO PowerPDU 4C (implementation may differ).

SNMP v3 is supported by following NETIO devices:

The MIB file with objects descriptions can be downloaded from the web administration in the SNMP protocol settings. NETIO devices use default port 161 for communication via SNMP. SNMP is a standard protocol for many third-party application monitoring softwares. Using the SNMP protocol, it is possible to get states of individual sockets, measure current consumption or control outputs.

Free snmpwalk windows